How To Apply Wood Putty To Nail Holes

Later on years of DIYing, nosotros are sharing our all-time spiral and nail hole filler tips and tricks! If we had learned these sooner, nosotros would have had much improve results, then larn from our mistakes!

Give thanks you to DAP for sponsoring this post.

Hey there! Practice you e'er consummate an awesome woodworking piece and then go lackluster results after you complete the finishing touches? It used to happen to use all the time. Nosotros'd build a really cool tabular array that looked crawly unfinished. Then we'd sand, make full any screw or boom holes with forest filler, sand and stain all for it to look not great. It'southward one of the reasons we have and then many painted pieces of article of furniture in our house! Many of those pieces were painted afterwardnosotros initially stained them considering the stained results were just below our expectations. And a big reason for that is we just weren't using wood filler properly (I'm sure the quality of the wood we were using as we were educational activity ourselves to build things didn't help either).

The skilful news is that over the years nosotros have learned some tips and tricks that accept helped us get MUCH improve results with stained forest projects. So that'southward what I'g hither to share with you today! These spiral and smash hole filler tips are and so easy, and now they seem obvious (isn't hindsight e'er 20/20).

Screw and Nail Pigsty Filler Tips

How to Apply Wood Putty

Applying forest filler is piece of cake. All you exercise is press the wood filler into the void caused past the screw or nail pigsty. We mostly utilise a putty knife, merely if the pigsty is actually small, we employ our fingers. One thing you always desire to practice is remove whatsoever excess woods putty before it dries.Y'all can see how much of a difference wood putty made when we capped out the bottom of the posts on our DIY deck bar .

After years of DIYing, we are sharing our best screw and nail hole filler tips and tricks! If we had learned these sooner, we would have had much better results, so learn from our mistakes!

How Long to Let Wood Putty Dry

One error that nosotros used to make much more often than I would like to admit is trying to sand and/or stain our wood putty before it was entirely dry out. Don't do that! You lot can speedily test to determine whether your wood putty is dry and ready to piece of work with by pressing the end of one of your fingernails into the putty. If your fingernail leaves any indention, you need to permit it dry out longer.

How to Sand Wood Putty

Another mistake we have made in the past is non sanding our forest putty repairs sufficiently. Trust me, it'south worth it to put a little effort into sanding. If you don't do a proficient job of sanding and then stain your project, there is a much greater chance that your wood putty will non take the stain besides equally the wood, which ways the repair will stand up out. Non a skilful wait. We similar to use our orbital sander to sand later doing our nail hole filler or other repairs.

How to Fill Screw and Nail Holes on Pre-stained Forest

Ane matter that took us far besides long to figure out was when to do our spiral smash pigsty filler repairs. Run across, nosotros've had many projects where it makes sense to stain the wood prior to installing it. That ways that our wood is stained before all of our boom and screw holes exist. And then, what'south the procedure for filling screw and smash holes on pre-stained wood? Turns out information technology'due south super easy! This method came in handy when nosotros made the wood screen to cover our utility boxes .

We like to tape off the surface area of the pre-stained woods that we need to drive nails or screws through. So, we bulldoze the nails or screws into place.

After years of DIYing, we are sharing our best screw and nail hole filler tips and tricks! If we had learned these sooner, we would have had much better results, so learn from our mistakes!

Next, we like to mix the wood filler with the stain that we used on the wood to go a actually squeamish color friction match.

After years of DIYing, we are sharing our best screw and nail hole filler tips and tricks! If we had learned these sooner, we would have had much better results, so learn from our mistakes!

We then apply it with our fingers or a putty knife. The painter'due south tape protects the woods that has already been stained so that it doesn't risk getting discolored or dulled by the wood putty and the filled surface area is a perfect lucifer! Nosotros utilise a putty knife to remove the excess and then skin the tape off and are left with a perfectly repaired boom or screw pigsty.

After years of DIYing, we are sharing our best screw and nail hole filler tips and tricks! If we had learned these sooner, we would have had much better results, so learn from our mistakes!

Then there y'all have information technology! I promise you've learned a little something and won't make the aforementioned smash hole filler mistakes we used to make :)

[mv_create i 11 200 2016 key="1″ blazon="list" title="Most Popular Projects" thumbnail="<a href=" https designertrapped com wp content uploads diy home decor projects blog jpg a]